SSC JE 2019 NOTIFICATION OUT!! BE AN EARLY BIRD AND JOIN IGNITE TO SECURE YOUR FUTURE!!

SSC JE 2019 NOTIFICATION OUT!!  BE AN EARLY BIRD AND JOIN IGNITE TO SECURE YOUR FUTURE!!

Ignite is in the process of starting classes for SSC JE 2019. Don’t miss out this golden opportunity for Diploma and B.Tech holders. Do join our intensive SSC Junior Engineer Coaching classes immediately to get a head start. Want to know more about the exam? Here are the details.

SSC JE 2019-20: Important Dates

Events

Dates

Notification Release Date

13th August 2019

Last Date to Apply Online

12th September 2019 (till 5:00 PM)

Tier-I Admit Card

To be Notified Later

Commencement of Tier-I Exam

To be Notified Later

Commencement of Tier-II Exam

To be Notified Later

SSC JE 2019 Exam Pattern

SSC JE 2019 Exam will be conducted in two phases. Paper 1 will be of 200 marks and paper 2 will be of 300 marks. Both paper 1 and paper 2 consists of Multiple Choice Questions. 0.25 marks will be deducted for each wrong answer given by the candidate in both papers.

Paper

Sections Asked

Maximum Marks

Duration

Paper – I

General Awareness

50

2 Hours

General Intelligence and Reasoning

50

Part A- General Engineering (civil & structural)

100

Part B- General Engineering (electrical)

Part C- General Engineering (mechanical)

Paper – II

Part A- General Eng. (civil & structural)

300

2 Hours

Part B- General Eng. (electrical)

Part C- General Eng. (mechanical)

SSC JE 2019 Syllabus – PAPER 1

The syllabus for SSC JE 2019 Exam covers major three sections:

  • General Intelligence and Reasoning

    • Analogies, Similarities

    • Differences, Space Visualization

    • Problem Solving, Analysis

    • judgment, Decision Making

    • Visual Memory, Discrimination

    • Observation, Relationship Concepts

    • Arithmetical Reasoning, Verbal And Figure Classification

    • Arithmetical Number Series Etc.

    • Abstract Ideas And Symbols And Their Relationships

    • Arithmetical Computations

    • Other Analytical Functions.

  • General Awareness

    • Current Affairs

    • India and its neighbouring countries

    • History

    • Culture

    • Geography

    • Economic Science

    • General Polity and Scientific Research, etc.

  • Technical Subjects (Electrical, Mechanical, Civil & Structural)

Electrical

Basic concepts. •Circuit law. •Magnetic Circuit. •AC Fundamentals. • Measurement and Measuring Instruments. •Electrical Machines. •Fractional Kilowatt Motors and single phase induction Motors. •Synchronous Machines. • Generation. •Transmission and Distribution.•Estimation and Costing. •Utilization and Electrical Energy. •Basic Electronics.

Mechanical

Theory of Machines and Machine Design. •Engineering Mechanics and Strength of Materials. •Properties of Pure Substances. •1st Law of Thermodynamics. • 2nd Law of Thermodynamics. • IC Engines Combustion. • Air standard Cycles for IC Engines. • IC Engine Performance. •IC Engine Cooling & Lubrication. • Rankine cycle of System. •Boilers. •Classification. •Specification. •Fitting & Accessories. •Air Compressors & their cycles. • Refrigeration cycles. •The principle of Refrigeration Plant. • Nozzles & Steam Turbines. •Properties & Classification of Fluids. •Fluid Statics, Measurement of Fluid Pressure. •Fluid kinematics. •Dynamics of Ideal fluids. • Measurement of Flow rate. •Basic principles. •Hydraulic Turbines. • Centrifugal Pumps. • Classification of steels.

Civil & Structural

Building Materials. •Estimating, Costing, and Valuation. •Surveying. • Soil Mechanics. • Hydraulics. •Irrigation Engineering. •Transportation Engineering. •Environmental Engineering

Theory of Structures. • Concrete Technology. • RCC Design, Steel Design.

SSC JE 2019 – Eligibility Criteria

SSC-JE-eligibility-criteria

Age Limit

S. No.

Organization

Post

Age Limit

1

Central Water Commission

Junior Engineer (Civil)

Up to 32 years

2

Central Water Commission

Junior Engineer (Mechanical)

Up to 32 years

3

Central Public Works Department (CPWD)

Junior Engineer (Civil)

Up to 32 years

4

Central Public Works Department (CPWD)

Junior Engineer (Electrical)

Up to 32 years

5

Military Engineer Services (MES)

Junior Engineer (Civil)

Up to 30 years

6

Military Engineer Services (MES)

Junior Engineer (Electrical and Mechanical)

Up to 30 years

7

Farakka Barrage Project

Junior Engineer (Civil)

Up to 30 years

8

Farakka Barrage Project

Junior Engineer (Electrical)

Up to 30 years

9

Farakka Barrage Project

Junior Engineer (Mechanical)

Up to 30 years

10

Border Road Organization

Junior Engineer (Civil)

Up to 30 years

11

Border Road Organization

Junior Engineer (Electrical & Mechanical)

Up to 30 years

12

Central Water and Power Research

Station

Junior Engineer (Civil)

Up to 30 years

13

Central Water and Power Research

Station

Junior Engineer (Electrical)

Up to 30 years

14

Central Water and Power Research

Station

Junior Engineer (Mechanical)

Up to 30 years

15

Directorate of Quality Assurance

(Naval)

Junior Engineer (Mechanical)

Up to 30 years

16

Directorate of Quality Assurance

(Naval)

Junior Engineer (Electrical)

Up to 30 years

17

National Technical Research

Organization (NTRO)

Junior Engineer (Civil)

Up to 30 years

18

National Technical Research

Organization (NTRO)

Junior Engineer (Electrical)

Up to 30 years

19

National Technical Research

Organization (NTRO)

Junior Engineer (Mechanical)

Up to 30 years

Relaxation is included for OBC/SC/ST

Educational Qualification

S. No.

Organization

Post

Educational and Other Qualification

1

Central Water Commission

Junior Engineer (Civil)

Degree or Diploma in Civil Engineering from a recognized University or Institution

2

Central Water Commission

Junior Engineer (Mechanical)

Degree or Diploma in Mechanical Engineering from a recognized University or Institution

3

Central Public Works Department (CPWD)

Junior Engineer (Civil)

Diploma in Civil Engineering from a recognized University or Institute

4

Central Public Works Department (CPWD)

Junior Engineer (Electrical)

Diploma in Electrical or Mechanical Engineering from a recognized University or Institute

5

Military Engineer Services (MES)

Junior Engineer (Civil)

Degree in Civil Engineering from a recognized University

Or

(a) Three years Diploma in Civil Engineering from a recognized Institute or University or Board; and

(b) Two years experience in Planning, Execution and

Maintenance of Civil Engineering works

6

Military Engineer Services (MES)

Junior Engineer (Electrical and Mechanical)

Degree in Electrical or Mechanical Engineering from a recognized University;

Or

(a) Three years diploma in Electrical or Mechanical Engineering from a recognized Institute or University or Board; and

(b) Two years experience in Planning, Execution and Maintenance of Electrical or Mechanical Engineering works.

7

Farakka Barrage Project

Junior Engineer (Civil)

Diploma in Civil Engineering from a recognized University or Institute or Board

8

Farakka Barrage Project

Junior Engineer (Electrical)

Diploma in Electrical Engineering from a recognized University or Institute or Board.

9

Farakka Barrage Project

Junior Engineer (Mechanical)

Diploma in Mechanical Engineering from a recognized University or Institute or Board

10

Border Road Organization

Junior Engineer (Civil)

Degree in Civil Engineering from a recognized University/ Institute

or

(a) Three years Diploma in Civil Engineering from a

recognized University/ Institute/ Board; and

(b) Two years working experience in Planning/ Execution/ Maintenance of Civil Engineering

works

11

Border Road Organization

Junior Engineer (Electrical & Mechanical)

Degree in Electrical or Mechanical Engineering from a recognized University/ Institute;

or

(a) Three years Diploma in Electrical/ Automobile/

Mechanical Engineering from a recognized University/ Institute/ Board; and

(b) Two years experience in Planning/ Execution/ Maintenance of Electrical or Mechanical

Engineering works

12

Central Water and Power Research

Station

Junior Engineer (Civil)

Diploma in Civil Engineering from a recognized University.

13

Central Water and Power Research

Station

Junior Engineer (Electrical)

Diploma in Electrical Engineering from a recognized University.

14

Central Water and Power Research

Station

Junior Engineer (Mechanical)

Diploma in Mechanical Engineering from a recognized University.

15

Directorate of Quality Assurance

(Naval)

Junior Engineer (Mechanical)

Degree in Mechanical Engineering from a recognized University;

or

(a) Three years Diploma in Mechanical Engineering

from a recognized University or Institution; and

(b) Two years experience in the respective fields

16

Directorate of Quality Assurance

(Naval)

Junior Engineer (Electrical)

Degree in Electrical Engineering from a recognized University;

or

(a) Three years Diploma in Electrical Engineering from a recognized University or Institution plus

(b) Two years experience in the respective field.

17

National Technical Research

Organization (NTRO)

Junior Engineer (Civil)

Diploma in Civil Engineering from recognized University/ Institution

18

National Technical Research

Organization (NTRO)

Junior Engineer (Electrical)

Diploma in Electrical Engineering from recognized University/ Institution

19

National Technical Research

Organization (NTRO)

Junior Engineer (Mechanical)

Diploma in Mechanical Engineering from recognized University/ Institution

WHY IGNITE?

IGNITE Thrissur is one of the most reputed NATA coaching institutions in Kerala having considerable years of experience in coaching students for competitive exams and providing Diploma tuitions, B.tech tuition, etc.

  • Experienced Faculty: Ignite is an IIT-NIT alumni initiative with the most experienced faculty to help its students excel in academics. Classes will be held by teachers with many years of teaching experience.

  • Individual attention: Ignite ensures that each student is given individual attention to cater to his/her individual needs.

  • Workshops and seminars : Ignite pays attention to the extracurricular activities and career development right from an early stage and organises workshops and seminars for the benefit of its students

  • Exam skills: Ignite conducts a series of mock exams regularly to assess each student’s academic performance and improve the exam skills like time management.

  • Paper 1 and Paper 2 integrated coaching: Ignite offers integrated coaching for both Paper 1 and Paper 2 regardless of cut off. That is technical side of Paper 1 will be covered including Paper 2 portions.

  • Scholarships: Ignite offers attractive scholarship for deserving students.

Start early!! Enroll for SSC JE entrance exam coaching classes soon if you are interested in pursuing a career in engineering. Classes will begin soon.

Do visit our website: www.ignitethrissur.in

Our facebook page: https://www.facebook.com/ignitetcr/

SSC JE 2019 Syllabus – PAPER 2
SSC-JE-Syllabus

Civil & Structural Engineering

Civil Engineering

Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland),asbestos products, timber and wood based products, laminates, bituminous materials, paints,varnishes.

Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methodsand unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks),RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building,Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula,Trapezodial formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements, Tube well,isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrapvalue, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods ofvaluation.

Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.

Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.

Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity. Lacey’s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.

Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.

Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution –cause, health effects, control.

Structural Engineering

Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.

Electrical Engineering

Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them.

Concepts of current, voltage, power, energy and their units.

Circuit law : Kirchhoff’s law, Simple Circuit solution using network theorems.

Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc.

Electromagnetic induction, self and mutual induction.

AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves,Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.

Electrical Machines : (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction,Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics.

Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications.

Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.

Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable – Different type of cables, cable rating and derating factor.

Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant

IE rules. Earthing practices and IE Rules.

Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating,

Electric drives and motors.

Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.

Mechanical Engineering

Theory of Machines and Machine Design

Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy,

Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.

Engineering Mechanics and Strength of Materials

Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler’s and Rankin’s theories, Thin walled pressure vessels.

Thermal Engineering

Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Mollier’s Chart).

1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation. 2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes.

Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.

IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency

with & without pump work.

Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.

Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines.

Fluid Mechanics & Machinery :Properties & Classification of Fluid : ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids. Fluid Statics : Pressure at a point. Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube . Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation. Dynamics of ideal fluids : Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation. Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter.

Hydraulic Turbines : Classifications, Principles. Centrifugal Pumps : Classifications, Principles, Performance.

Production Engineering: Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.

<>SSC Junior Engineer Coaching


Leave a Reply

Your email address will not be published. Required fields are marked *